New Tanker semi-trailer EMIRSAN LPG Tank Semi Trailer

Tanker walls: 12 mm

Compartment walls: 14 mm

End walls: 14 mm

LPG

LPG Transport Semi Trailer Technical Specifications

57 m3 LPG TRANSPORT TANK SPECIAL FEATURE

Capacity 57 m3

Type Cylindrical Type Tanker

GVW 42.000 Kg

Fifth Wheel laod 11.500 Kg

Max axle Load 36.000 Kg

Tare Weight 12.000 Kg

Payload 30.000 Kg

Height 3900 mm

Width 2550 mm

Fifth Wheel Height 1250 mm(for single truck)

Total Lenght 13.200 mm

Design Pressure 17,5 bar

Dished Ends Type Ellipsoidal

Test Pressure 26,5 bar

Blasting and Painting SA2.5 the quality of the exterior of the tank shot blasted, epoxy primer after sanding the surfaces with shopprimer is to be implemented and the boat will be painted with white acrylic finish. The customer wants to be pasted on top of the tank other hazardous substances and other articles.

Control (Inspection and Tests) Control Costs Erdemir 'to belong to a hydrostatic tank to be tested

• Hydrostatic pressure test • Size Control • Control and Certification of Materials

Tires and Rims 6+1 pieces 385/65R/22.5” Sava brand Wheel rims Jantsa brand. Dimensions of the tires are determined considering the nearest load index values to technical criteria..

Chassis Has been produced in welding constructions with gas metal arc welding as "I" crossing from high resistant and heavy duty ST 52.3 considering overloads proper to capacity and intended usage

Axles & Suspension BPW Type Turkish brand MPD 3 x 12 Ton axles with air spring suspensions / Drum brakes. There are brake shoes and heavy brake levers suitable for TSE norms

Shock absorber will be used for load and height adjustable

Suspension will be air suspension and first axle will be liftable

Brake Wabco ABS brake system will be used,

Dual circuit brake hardware, 24” Service brake bellows fitted to axle 3 24x30” Emergency brake fitted to axle 1 and axle 2 Load balancing distribution valve, Automatic brake adjusters

Electric Installation 24 V electrical system with European norms. In addition, tank-top and trailer top and the electric lamp and warning will be posters. (ADR) 2 stop lights on the rear Bumper, 5 lights on the each side of the tank.

Tank Body Cylindrical body of 10 mm Special Lpg steel plate P355 ACC. To En 10028 and dish ends will be 12 mm

Equıpment Tanks Over Block Flange DN 50 _ 2 units

Block Flange DN 80 _ 1 unit

Hydraulic Operator _1 unit

2 "Ball Valves _3 units _

2 "Safety Valve_2 units _

¾” Check valve_ 2 units_

Rotogauge (Rotary Level Indicator) _ 1 unit _

Glycerine pressure gauge (0-25 bar), Ø 63 _ 1 unit _

Thermometer (-30 / 60 ˚ C) Ø63 _ 1 unit_

Acme Filler Cap _ 3 units_

Manhole_ 1 unit 16”

Filter_ 1 Unit

Parking Leg OMS Brand Two speed, telescopic, mechanical conveyor legs, with the capacity of 25 tons

Painting Before the painting, surface and accessories of chassis are made cleaned

PPG or DYO brand high build epoxy filter is used for first painting.

PPG or DYO brand is used for the main painting (3 times ).

The RAL code color selection is made according to customers choice.

King Pin OMS (Certificated Turkish Brand) Jost Type Steel king-pin which is 2” suitable for 6x2 tractor unit according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used.

- Kin pin Height will be arrange according to your truck.

King Pin plate thickness 12 mm reinforced with min. 3+2 steel 160 NPU.

Accessories 1 unit Steel Bumper

1 unit water tank (Made of Plastic with the capacity of 30 lt)

1 unit spare tire carrier basket

2 units wheel chock and the connection

2 units Fire Extinguisher Cabinet (ADR)

2 units Food & Tool Box made of steel

Sunshade installed to the top of the Tank 3M Brand yellow colour along both sides of the Tank and 3M Brand red color on the rear bumper and on the rear dished Heads.